General
- Name: Grace
- Material: Mahogany
- Flag: French
- Length: 9.1 M
- Beam: 2.2 M
- Depth: 0.7 M
Specifications
Hacker-Craft 30 Sport
General information (Hacker-Craft 30 Sport)
- Brand/type : Hacker-Craft 30 Sport
- Name : Grace
- Yard : Hacker Boats co. Inc (USA)
- Designer : Hacker Design
- Year : 2009, launched 2010
- Hull number : HKQ00481A910
- Engine : Single Crusader 8.1L MPI, 385hp petrol
- Construction : Mahogany
- Length over all : 9.10m
- Beam : 2.20m
- Draft : 0.70m
- Weight empty : 2.380kg
- Diesel (L) : 200L
- Location : Port Grimaud, France
- Price : € 130.000,-
- VAT-status : VAT paid
- Flag : French
- Owners : 1st Owner
Hull, deck and cockpit (Hacker-Craft 30 Sport)
- Built in Honduran mahogany wood using 3 layers of planking (20mm thick each) with Philippine mahogany frames and glued with epoxy.
- 18 Layers of varnish
- Completely hand-made
- Teak bathing platform with 3 ladder steps
- Sunbed in sand beige at aft deck
- Engine access under sunbed
- Cockpit with comfortable U-shaped sofa in soft sand beige leather
- Various lockers
- Forward helm area with sofa finished in soft sand beige leather and elegant dashboard
- Mahogany steering wheel with polished stainless steel spokes
- Engine counters and throttle control
- Rigid stainless steel windscreen with tempered glass
- Anchor with rope
- Mooring lines and fenders
Engine
- Single Crusader 8.1L MPI, 8 cylinder petrol engine, producing 385hp
Electric installation (Dufour 410 Grand Large)
- 12V/220V power circuit
- 1 x 12v engine start battery
- 1 x 12v domestic battery
____________________________________________________________________
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed. These particulars are not part of any contract or offer and are supplied on the understanding that all negotiations shall be through PJ-Yachting who is acting as broker only.
The prospective purchaser is recommended to check the particulars and, where appropriate (and at his own expense) to employ a qualified surveyor/engineer to carry out structural and/or mechanical and electrical surveys.